Divider Rounder~
Before/After
Dough Sheeter ~ Before/After
What does the term
"RECONDITIONED/REBUILT” mean?
Here we will review equipment
electrically and replace parts
as needed with new electrical
controls wired to an AutoCAD
drawn wiring print or to
original print, strip prime and
recoat entire mixer in
“steel-it®” s/s coating, ,and
replace worn mechanicals on an
“as needed” basis. All motors
are rebuilt at motor shop (or
new). The equipment will be shop
tested and upgraded to a “good”
rating. Note: if a mixer with a
bowl jacket we will pressure
test jacket and re-insulate bowl
jacket (if applicable) with new
closed cell insulation.
Can you describe
“REMANUFACTURED” (90% NEW)?
Equipment is stripped down to basic frame structure. Mild steel
frame work is stripped and coated in steel- it®, all electrical
components, running mechanicals are new. If equipment is a mixer
with a bowl jacket, the jacket will be replaced new. All access
panels are hinged with electrical interlocks. All new motors are
installed. All applicable features found in new equipment can be
included, i.e., plc controls, new seal designs, s/s split hub
spiders, hydraulic bowl tilt systems, etc. The equipment leaves
our shop with a “best” rating. At this level, it will operate
and perform as new. Customer also has the able to customize
equipment at this level for their septic needs. Equipment will
be supplied with manual and electrical schematics.
*Free Shipping applies to lower
48 United States and is Included if
you purchase a minimum rebuild package.
|