|
New
Equipment |
Globe SP25 25 Quart Mixer, 3/4HP |
|
 |
|
Globe SP25 25
Quart Mixer
Motor: 3/4 h.p. (.5kW), grease packed ball
bearing, air-cooled, 120/60/1 (50Hz
available)Motor: 3/4 h.p. (.5kW), grease packed
ball bearing, air-cooled, 120/60/1 (50Hz
available)
Controls: Spar Mixer controls are
front-mounted to give easy access in cramped
kitchen environments. The following controls are
standard on all Spar Mixers: separate start and
emergency stop buttons so operators can shut down
the mixer immediately in an emergency situation, a
15-minute timer which shuts off the machine after
set time has elapsed, and thermal overload
protection Cord and Plug: 6 ft. flexible three
wire cord and ground prong.
Transmission: Heat-treated, hardened alloy,
precision milled gears operate with planetary
action. Gears are packed in a long-lasting, high
pressure grease. Planetary gears are driven by an
oversized cog-wheel, which is in turn driven by a
cogged belt powered by the motor drive shaft.
Cogged belt is a long-lasting, rugged fibre/rubber
composite. This unique design yields high-torque
mixing power while avoiding the high cost
encountered repairing direct-drive transmission
components. Speeds: (Agitator rpm)
1. Low Speed 102
2. Intermediate Speed 183
3. High Speed 352
Bowls and Agitators: Standard equipment
includes a 24.3Qt. (23L) high quality stainless
steel bowl, dough hook, flat beater, and whip. A
sturdy hand lever on the body column raises and
lowers the bowl as well as locking in place at the
top and bottom positions.
Attachments: Standard is the No. 12 hub for
powering a standard size vegetable slicer/cheese
shredder and a standard size meat mincer/grinder.
Finish: Top (transmission cover): metallic
bronze epoxy enamel
Bottom: metallic gray epoxy enamel
Shipping Information:
Carton Size: Depth 24in.(61cm) Width 26.4in.(58cm)
Height 40.2in.(102cm)
Cartons are affixed to an undersized skid
(pallet), the weight and diminsions of this skid
are not included above and may vary from shipment
to shipment.
|
