Water Treatment Requirements: 

*Cold water, 30 to 80 PSI
*pH between 6.8 and 7.6
*Conductivity less than 1/500,000 ohms per inch
*Total dissolved solids less than 100 parts per million
*Hardness from 5.3 to 7.3 grains per gallon

*Maximum Salinity Ion Content:

*Chlorine less than 0.5 parts per million
*Chlorides less than 30 parts per million
*Sulfates less than 40 parts per million
*Iron less than 0.1 parts per million
*Copper less than 0.05 parts per million
*Manganese less than 0.05 parts per million
*Chloramines less than 0.5 parts per million

• Heavy duty stainless steel exterior with 300 Series Stainless Steel interior and aluminized steel top
• Modular wall and ceiling panels, designed for cam-lock on-site assembly
• Gasket seals provided at all seams and panel joints
• Quick response air-wash humidity/heat system
• Designed for dual voltage 208 or 240-Volt, single or three phase power input
• Heavy duty door with removable  magnetic door seal and closure system.

• 70-120°F Temperature  Range
• Very accurate relative humidity control with 50-95% operating range.
• Same heating elements generate both heat and humidity.
  [No submerged elements]
• Interior bumpers protect proofer walls from rack damage
• Full width grab bar handle protects door from rack dents

• All controls located above door.
• Digital set TEMPERATURE, set HUMIDITY & TIME remaining displays
• Set temperature touch pads
  [1°F increments]
• Set relative humidity touch pads
  [1% increment.]