New Equipment

Everpure Model EV9797-21 Kleensteam II Single System

List Price: $1,004.00
Your Price: $622.00 * USD
You Save: $382.00
Item Number: 12922
Manufacturer: Everpure
Model No.: EV9797-21
Manufacturer Specification Sheet

*Price Does NOT include cost of crating, shipping, delivery or installation.

Everpure Kleensteam II Single System

Model EV9797-21

 

 

This filtration system is a total water treatment systems for steam applications.

 

Benefits:

  • A total system delivering high quality filtered water with scale inhibition and deliming capabilities.

  • New dual cartridge design provides enhanced performance for low or high flow capacity steamers and flexibility for expanding to meet future needs.

  • Fine filters incoming water to improve the performance, maximize energy efficiency and increase the life of steam equipment.

  • Reduces chlorine-induced corrosion.

  • System is simple to install, operate and maintain.

  • Easy deliming with Scale Kleen, which is fed into the boiler through the SR-X bowl without use of hazardous chemicals or special piping.

  • Long lasting SS-10 cartridge is more effective in higher alkalinity/hardness/TDS/temperature installations.

  • Sophisticated Hydroblend compound prevents limescale formation in high temperature steam applications.

Installation Tips:

  • Choose a mounting location suitable to support the full weight of the system when operating.

  • Use minimum 1/2" inlet water line (3/4" preferred).

  • Connect the system to the boiler feed water line only.  Do not connect to the condenser water line.

  • Install vertically with cartridges hanging down and allow 2 1/2" clearance below the cartridge for easy cartridge replacement.

  • Flush cartridges by running water through system for five minutes at full flow.

Operation Tips:

  • Change 7CB5 cartridge on a regular 6 month preventative maintenance program, when capacity is reached or when pressure falls below 10 psi.

  • Change SS-10 cartridge before Hydroblend compound is completely used up.

  • Service flow rate must not exceed 2.5 gpm for single cartridge systems or 5.0 gpm for dual cartridge systems.

  • Always flush the filter cartridge at time of installation and cartridge change.

  • Use for periodic deliming as needed by installing the dip tube assembly in place of the SS-10 and dissolving Scale Kleen in SR-X housing.  Full deliming instructions are provided with the system.

Applications/Sizing:

  • For commercial steam applications

  • For use with foodservice steamer and combi-oven applications

  • The Kleensteam II Single System is shipped with one 7CB5 cartridge (for first filter head) and one filter head plug installed in the second filter head.  Capacity is expandable by adding a second 7CB5 cartridge.

Options:

  • EV9618-11 - 7CB5 Replacement Cartridge

  • EV9799-02 - SS-10 Cartridge

Model Dimensions Inlet/Outlet Connection Pressure Req. Temperature Ship Weight
EV9797-21 25.5" H x 20.5" W x 7" D 3/4" FNPT 10 to 125 psi, non-shock 100°F Max at Inlet 26 lbs.