Sottoriva Flex Line

*Price Does NOT include cost of crating, shipping, delivery or installation.

Due to the Euro we will be quoting these units on a needed basis.  To receive a quote with pricing please click the “Get Quote” button now or Call our office to Get a Quote.

Sottoriva Flex Line

Flex Line for Dinner rolls, Hamburger buns, Finger rolls, Baguette.

Hourly capacity 2000 pieces per row. 

Weight range according with the set of the dividing pistons.

LINE INCLUDES FOLLOWING EQUIPMENT:

DOUGH FEEDER:  with star shaper dough cutting system and tray loader cut dough from that take the dough from the bottom of the stars and take up to load into the hopper of the divider and rounder.  The dough feeder has a hopper for about 440 lbs of dough.

DIVIDER ROUNDER:  for the production of round bread, hamburger, Arab bread, pita and pizza. The machine, suitable to work softy and semi-tough doughs, is equipped with Teflon-coated stainless steel hopper for a capacity of 25 kgs. approx. and it could be feed by proper feeding device. The dough, gently handled thanks to a dosing star system, is compressed in the portions chambers, which appropriately adjusted give the required weight. Once the weight is fixed, the dough pieces are discharged and enters the rounding drum, which is easily interchangeable according to the requested weight. During the machine operation, it is possible, by a potentiometer, to make the contemporaneous and independent regulation of the rounding and production speed. At the end, the pieces, properly rounded, are deposited on the outlet spreading belt. “Touch screen” control panel with 50 setting programs and PLC for the adjustment of weight, production speed and rounding speed. Hourly production from 1000 to 2000 pcs/h for row. Weight range from 30 to 700 grs.
 

SPREADING BELTS:  adjustable device on the Athena/Large.

MOULDING STATION:  850 mm for the production of finger rolls curl and just press or for Hamburger buns complete with: pre pressing roller, curling chain, pressing board with lateral side guide .
The pressing roller station is manufactured in thick steel structure and the pressing rollers are in stainless steel and are covered by thick Teflon anti-sticky tube in order to work with very soft and sticky dough.
The curling chains to mould the finger rolls are in stainless steel and all the belts that the make-up bench is equipped are in particular plastic material that allow to use soft dough.

SECOND MOULDING STATION:  complete with pressing plate and pressing moving belt 850 mm wide. Automatic pneumatic system to drive the belt in order to keep it straight, complete with all the chains to keep the long loaf straight. Gently moulding system in order to achieve a good moulding of the long loaf. Complete with n.2 flour dusters and lateral side guide in the first pressing plate.

MOISTURIZING AND SEEDING STATION:  single hopper made in steel structure. The products that are coming into the station are first spray by water then the seeds will be sprinkle on the top of the bread. The system has it own hopper and the net for the seeds recover.

ROLLER ALIGNER DEVICE:  to align the pieces before discharge in the tray.

RECIPROCATOR retractile belt:  This unit permits to obtain a hourly production of 2000 pcs / h per row. The types of bread you can produce are : buns, hamburger, long-loaf and hot dogs. With this type of system it is possible to set different values ; from the number of rows to the desired distance among the different products. ( this one can be chosen by the adjustable speed of the retractile belt ) .
The machine, equipped with a welded sheet basement, is essentially made up by a conveyor controlled by a motor variator. The movement is “step by step” to allow the product discharge on trays or on the below frames, of 600x800 mm or 600x 990 mm. Or different sizes according with the customer needs.

OPTIONS:

EXTRA Rounding Drum - to be chose from the list according with the weight range.

EXTRA Inside Drum - to be chose from the list according with the dividing head used.

6 Pockets Piston Device - weight range from 1 - 4-1/2 oz.

5 Pockets Piston Device - weight range from 1 - 5-1/2 oz.

4 Pockets Piston Device - weight range from 1-3/4 - 7-1/2 oz.

3 Pockets Piston Device - weight range from 4-1/2 - 8-3/4 oz.

2 Pockets Piston Device - weight range from 5-1/4 - 12-1/2 oz.

1 Pockets Piston Device - weight range from 10-1/2 - 24 oz.

Due to the Euro we will be quoting these units on a needed basis.  To receive a quote with pricing please click the “Get Quote” button now.