New Equipment

Single End Load Stainless Steel For Revent Single Rack Oven

Your Price: $0.00 * USD
Item Number: 7519
Manufacturer: Bakery Equipment.com
Model No.: RV659-ALFT-SEL

*Price Does NOT include cost of crating, shipping, delivery or installation.

 

Bakery Equipment.com Stainless Steel Oven Racks

 

Standard Duty (18 Ga. Runner)

 

Single End Load Stainless Steel For Revent Single Rack Oven

* All Stainless Steel Construction

* Runners are 18 Ga.

* Fully Mig-Welded on 1" Seams

* Full Sheet Metal Constructed Caster Plate

* Threaded Inserts for Quick Change Caster Ability

* Frame Assembly is 1" Square Tube

* 14 Gauge Top Channel For Rugged on/off Carrier Use

* Caster are rated at 440 lbs each

* Casters have 525 Degrees Heat Range

* Casters have a grease-less wheel bearing

* Dimensions: 20.5"W x 24"D x 71-7/8"H - "A" Lift

                       20.5"W x 24"D x 72"H - "B" Lift

                       20.5"W x 24"D x 73-1/8"H - "C" Lift

 

Racks are shipped "Knocked Down", which is the most economical for shipping costs.

 * All slides welded to both sides of the rack, laid into a box with the caster's attached to the caster plates and all hardware put into a smaller bag along with instructions on how to put together.

 

Racks can be shipped “Assembled” for an additional charge per rack.

 * Rack is fully assembled with all slides fully welded to the square tubing.

 

Racks can be shipped "All Welded/Assembled" for an additional $75 increased shipping expense Per Rack.

 * Rack is fully assembled with all slides, bolts and tork screws welded in place.

 

 

 

 

 

 

One Year Warranty on Casters

 

 

 

Standard Duty Racks 

 

MODEL NUMBER

DESCRIPTION – PAN CAPACITY

SPACING

WEIGHT

RV659-2.5-ALFT-SEL

24 Shelves Cap – 18x26 Pan Size

2.5”

101

RV659-3.0-ALFT-SEL

20 Shelves Cap – 18x26 Pan Size

3”

94

RV659-3.5-ALFT-SEL

18 Shelves Cap – 18x26 Pan Size

3.5”

98