Single Side Load Stainless Steel For Revent Rack Single Oven

*Price Does NOT include cost of crating, shipping, delivery or installation.

Bakery Equipment.com Stainless Steel Oven Racks

Standard Duty (18 Ga. Runner)

Single Side Load Stainless Steel For Revent Rack Single Oven

* All Stainless Steel Construction

* Runners are 18 Ga.

* Fully Mig-Welded on 1" Seams

* Full Sheet Metal Constructed Caster Plate

* Threaded Inserts for Quick Change Caster Ability

* Frame Assembly is 1" Square Tube

* 14 Gauge Top Channel For Rugged on/off Carrier Use

* Caster are rated at 440 lbs each

* Casters have 525 Degrees Heat Range

* Casters have a grease-less wheel bearing

* Dimensions: 28.5"W x 18"D x 71-7/8"H - "A" Lift

                       28.5"W x 18"D x 72"H - "B" Lift

                       28.5"W x 18"D x 73-1/8"H - "C" Lift

Racks are shipped "Knocked Down", which is the most economical for shipping costs.

 * All slides welded to both sides of the rack, laid into a box with the caster's attached to the caster plates and all hardware put into a smaller bag along with instructions on how to put together.

Racks can be shipped “Assembled” for an additional charge per rack.

 * Rack is fully assembled with all slides fully welded to the square tubing.

Racks can be shipped "All Welded/Assembled" for an additional $75 increased shipping expense Per Rack.

 * Rack is fully assembled with all slides, bolts and tork screws welded in place.

One Year Warranty on Casters

Standard Duty Racks