|
New
Equipment |
Blodgett
SG3240E Gas Fired Conveyor Oven
"Smart Generation" |
|
Click
On Picture For Larger Image |
|
Smart
Generation™ Model SG3240E/G Electric/Gas
Conveyor Oven
Blodgett’s new Smart Generation ™ Conveyor
Oven is incredibly powerful and incredibly easy to
use with features designed for consistency and
efficiency. A solid curtain of hot air envelops
the food as it moves through the cooking
compartment, resulting in maximum heat transfer
and more even results — beltwide. Conveyor
blowers circulate in opposite directions, forcing
heat to surround and penetrate food evenly across
entire conveyor belt.
And
the oven is triple-stackable, so you can increase
capacity without losing floor space. Plus, a
special cooling fans helps the unit operate
quietly, while advanced airflow engineering keeps
your kitchen cool. With the thoughtful design
features like these, the Smart Generation™
conveyor oven is the smart way to achieve cooking
perfection every time. This new conveyor oven
maximizes throughout by consistently baking full
oven loads. It also saves money by reducing food
waste caused by uneven cooking.
The
SG3240 has a 32” (813mm) wide belt and 40”
(1016mm) baking zone length. Single, double, or
triple stack models. Base units available for
stacking with existing oven.
Key
Benefits:
- An adjustable
top air plate allows you to customize the oven
for a diverse menu. Plus, no tools are
required to change clearance plates.
- Ambidextrous
operation with no air plate changes required.
- TheSG3240 has
side loading door for products with reduced
cooking times.
- "Smart"
controls with remote interface capabilities
— provides onboard diagnosis, which makes
the machine more service-friendly.
- The advanced
airflow system cooks faster and better than
the previous model.
- Extra large
window of acceptability allows products with
different baking characteristics to be
prepared without changing oven settings.
- Four Inch
product clearance allows larger items to be
cooked.
STANDARD
FEATURES
- Stainless steel
front, top, sides and back
- Aluminized steel
back and bottom
- Vitreous fiber
insulation at bottom, back, top and sides
- Ceramic fiber
insulation at blower and heater installations
- Two single inlet
blowers behind the heat source for air
circulation, independently supplying top and
bottom air flow
- Front-mounted
controls
- Removable single
unit belt assembly
- Belt width:
32"
SG3240G
Single
|
One
base section with single chimney kit and 23
1/4" black legs with casters.
Base Section Description: Stainless steel
front, top and sides. Aluminized steel back
and bottom. Side loading glass door and
handle. Aluminized interior. Reversible belt
direction. 32" stainless steel wire
mesh conveyor belt. Two single inlet
blowers. Smart Generation manual control.
Product stops. 4.0" product clearance.
110,000 BTU per section |
|
|
SG3240G
Double
|
Two
base sections with double chimney kit, heat
shield and 17 1/4" black legs with
casters.
Base Section Description: Stainless steel
front, top and sides. Aluminized steel back
and bottom. Side loading glass door and
handle. Aluminized interior. Reversible belt
direction. 32" stainless steel wire
mesh conveyor belt. Two single inlet
blowers. Smart Generation manual control.
Product stops. 4.0" product clearance.
110,000 BTU per section |
|
|
SG3240G
Triple
|
Three
base sections with triple chimney kit, heat shields
and triple stack base with casters.
Base Section Description: Stainless steel
front, top and sides. Aluminized steel back
and bottom. Side loading glass door and
handle. Aluminized interior. Reversible belt
direction. 32" stainless steel wire
mesh conveyor belt. Two single inlet
blowers. Smart Generation manual control.
Product stops. 4.0" product clearance.
110,000 BTU per section. |
|
