| Your Price: |
$0.00 *
USD
|
| Item Number: |
14003 |
| Manufacturer: |
LBC |
| Model No.: |
LRPR2-30HO |
| Availability: |
-Ships Within 3-4 Weeks |
Manufacturer Specification Sheet
*Price Does NOT include cost of crating, shipping, delivery or installation.
LBC Roll-In Rack High Output Retarder/Proofer (2 Door)
Automatic Retarding, Slacking and Proofing of a Wide Variety of Products at Varying Times and Temperatures.
High Output (HO) models designed for large operations and for "Green Dough" or scratch mixed bakeries.
Model LRPR2-30HO 40" Deep
(2 Single Side Load Racks or 3 Single End Load Rack Capacity)
- Racks Sold Separately. To View LBC Racks - Click Here
- Same features and benefits as Standard Duty retarder/proofer
- Increased pull-down capacity
- Built on same solid base as proofer
- Epoxy-Coated Evaporator Coil assure long life.
- Optional Condenser
- Includes Evaporator, Expansion Valve and Refrigeration Solenoid Valve
(Configured for R404a optional condenser)
- Proof, Retard or Operate in Automatic Mode
CONSTRUCTION FEATURES:
- Heavy duty stainless steel exterior with 300 Series stainless steel interior and aluminized steel top
- Walls, ceiling and door are foam insulated
- Modular wall and ceiling panels, designed for cam-lock on-site assembly
- Gasket seals provided at all seams and panel joints
- Quick response air-wash humidity/heat system with epoxy coated coils
- High capacity refrigeration system
- Designed for dual voltage 208 or 240 Volt, single or three phase power input
- Heavy duty door with removable magnetic door seal and mechanical closure system.
| |
PERFORMANCE FEATURES:
- Dual purpose unit provides both dough proofing and retarding capabilities
- 70-120°F proofing temperature range
- 34-45°F retarding temperature range
- Very accurate relative humidity control, with 50-95% operating range.
- Same heating elements generate both heat and humidity. (No submerged elements)
- Large evaporator sized for high humidity levels, to prevent drying
- High capacity refrigeration system for fast temperature pull-down
- All power supply components mounted above door, with unit front access
- Interior bumpers protect proofer walls from rack damage
- Full width grab bar handle protects door from rack dents.
| |
CONTROL PACKAGE
- All controls located within the right side door, at eye level
- Digital set TEMPERATURE, set HUMIDITY & TIME remaining displays
- Real time-of-day and automatic proof-start-time setting
- Set temperature touch pads (1°F increments)
- Set relative humidity touch pads (1% increments)
| |
POWER
| Electric: |
Available in 208V or 240V; 1 or 3 Phase
kW: see Spec Sheet (PDF)
Optional condenser powered separately. |
NOTES
All models are shipped Knocked Down; Assembly Required
Water Treatment Requirements:
|
*Cold water, 30 to 80 PSI
*pH between 6.8 and 7.6
*Conductivity less than 1/500,000 ohms per inch
*Total dissolved solids less than 100 parts per million
*Hardness from 5.3 to 7.3 grains per gallon
*Maximum Salinity Ion Content:
*Chlorine less than 0.5 parts per million
*Chlorides less than 30 parts per million
*Sulfates less than 40 parts per million
*Iron less than 0.1 parts per million
*Copper less than 0.05 parts per million
*Manganese less than 0.05 parts per million
*Chloramines less than 0.5 parts per million |
STANDARD PRODUCT WARRANTY
One Year, Parts & Labor (Mfg Warranty)
