New Equipment

LBC BakerSeries® Roll-In Rack, Single Door Proofer M# LRP1-40

List Price:	$0.00
Your Price:	$0.00 * USD
You Save:	$0.00
Item Number:	9808
Manufacturer:	LBC
Model No.:	LRP1-40
Availability:	-Ships Within 3-4 Weeks

Manufacturer Specification Sheet

*Price Does NOT include cost of crating, shipping, delivery or installation.

BakerSeries® Roll-In Rack, Single Door Proofer Model: LRP1-Series (LRP1-40)

Roll-In Rack Proofers
Essential for Uniform Proofing of a Wide Variety of Products at Varying Times.
Also be sure to see the LBC Proofer/Retarder Units!

* Most Accurate in the Industry
* Up to 95% Relative Humidity with a Temperature Range of 80°F - 120°F
* Depth increases by adding 20" or 30" Panels
* Stainless Steel Construction with Aluminized Top and Optional Stainless Steel Floor
* Accommodates (1) single side-load, (1) single end roll-in racks.
style lift. (Scroll Down to View Rack Accommodations for this particular model)
Click HERE to view LBC Oven Racks

POWER

Electrical

Available in 208V or 240V; 1 or 3 phase
kW: See Spec Sheets (PDF)

NOTES

All Models Shipped Knocked Down; Assembly Required

Water Treatment Requirements:

*Cold water, 30 to 80 PSI
*pH between 6.8 and 7.6
*Conductivity less than 1/500,000 ohms per inch
*Total dissolved solids less than 100 parts per million
*Hardness from 5.3 to 7.3 grains per gallon

*Maximum Salinity Ion Content:

*Chlorine less than 0.5 parts per million
*Chlorides less than 30 parts per million
*Sulfates less than 40 parts per million
*Iron less than 0.1 parts per million
*Copper less than 0.05 parts per million
*Manganese less than 0.05 parts per million
*Chloramines less than 0.5 parts per million

MODEL/RACK CAPACITY GUIDEModel / DepthSide-Load
28.4"W X 18"DEnd-Load
26"W X 20.4"DLRP1-401 Rack1 RackLRP1-502 Racks1 RacksLRP1-602 Racks2 RacksLRP1-703 Racks2 RacksLRP1-803 Racks3 RacksLRP1-904 Racks3 RacksLRP1-1004 Racks4 RacksLRP1-1105 Racks4 RacksLRP1-1205 Racks5 Racks

Racks Sold Separately:
Click HERE to view LBC Oven Racks

CONSTRUCTION FEATURES

Heavy duty stainless steel exterior with 300 Series Stainless Steel interior and aluminized steel top
Modular wall and ceiling panels, designed for cam-lock on-site assembly
Gasket seals provided at all seams and panel joints
Quick response air-wash humidity/heat system
Designed for dual voltage 208 or 240-Volt, single or three phase power input
Heavy duty door with removable magnetic door seal and closure system.

PERFORMANCE FEATURES

70-120°F Temperature Range
Very accurate relative humidity control with 50-95% operating range.
Same heating elements generate both heat and humidity.
[No submerged elements]
Interior bumpers protect proofer walls from rack damage
Full width grab bar handle protects door from rack dents

CONTROL PACKAGE

All controls located above door.
Digital set TEMPERATURE, set HUMIDITY & TIME remaining displays
Set temperature touch pads
[1°F increments]
Set relative humidity touch pads
[1% increment.]

STANDARD PRODUCT WARRANTY
One year, parts & labor