| List Price: |
$0.00 |
| Your Price: |
$0.00 *
USD
|
| You Save: |
$0.00 |
| Item Number: |
9812 |
| Manufacturer: |
LBC |
| Model No.: |
LRP1-80 |
| Availability: |
-Ships Within 3-4 Weeks |
Manufacturer Specification Sheet
*Price Does NOT include cost of crating, shipping, delivery or installation.
BakerSeries® Roll-In Rack, Single Door Proofer Model: LRP1-Series (LRP1-80)
Roll-In Rack Proofers
Essential for Uniform Proofing of a Wide Variety of Products at Varying Times.
Also be sure to see the Lang Proofer/Retarder Units!
* Most Accurate in the Industry
* Up to 95% Relative Humidity with a Temperature Range of 80°F - 120°F
* Depth increases by adding 20" or 30" Panels
* Stainless Steel Construction with Aluminized Top and Optional Stainless Steel Floor
* Accommodates (3) single side-load, (3) single end-load and (1) double roll-in racks.
style lift. (Scroll Down to View Rack Accommodations for this particular model)
Click HERE to view LBC Oven Racks
POWER
| Electrical |
Available in 208V or 240V; 1 or 3 phase
kW: See Spec Sheets (PDF) |
NOTES
All Models Shipped Knocked Down; Assembly Required
|
Water Treatment Requirements:
*Cold water, 30 to 80 PSI
*pH between 6.8 and 7.6
*Conductivity less than 1/500,000 ohms per inch
*Total dissolved solids less than 100 parts per million
*Hardness from 5.3 to 7.3 grains per gallon
*Maximum Salinity Ion Content:
*Chlorine less than 0.5 parts per million
*Chlorides less than 30 parts per million
*Sulfates less than 40 parts per million
*Iron less than 0.1 parts per million
*Copper less than 0.05 parts per million
*Manganese less than 0.05 parts per million
*Chloramines less than 0.5 parts per million
| |
| MODEL/RACK CAPACITY GUIDE |
| Model / Depth |
Side-Load
28.4"W X 18"D |
End-Load
26"W X 20.4"D |
| LRP1-40 |
1 Rack |
1 Rack |
| LRP1-50 |
2 Racks |
1 Rack |
| LRP1-60 |
2 Racks |
2 Racks |
| LRP1-70 |
3 Racks |
2 Racks |
| LRP1-80 |
3 Racks |
3 Racks |
| LRP1-90 |
4 Racks |
3 Racks |
| LRP1-100 |
4 Racks |
4 Racks |
| LRP1-110 |
5 Racks |
4 Racks |
| LRP1-120 |
5 Racks |
5 Racks |
Racks Sold Separately:
Click HERE to view LBC Oven Racks
|
CONSTRUCTION FEATURES
- Heavy duty stainless steel exterior with 300 Series Stainless Steel interior and aluminized steel top
- Modular wall and ceiling panels, designed for cam-lock on-site assembly
- Gasket seals provided at all seams and panel joints
- Quick response air-wash humidity/heat system
- Designed for dual voltage 208 or 240-Volt, single or three phase power input
- Heavy duty door with removable magnetic door seal and closure system.
| |
PERFORMANCE FEATURES
- 70-120°F Temperature Range
- Very accurate relative humidity control with 50-95% operating range.
- Same heating elements generate both heat and humidity.
[No submerged elements]
- Interior bumpers protect proofer walls from rack damage
- Full width grab bar handle protects door from rack dents
| |
CONTROL PACKAGE
- All controls located above door.
- Digital set TEMPERATURE, set HUMIDITY & TIME remaining displays
- Set temperature touch pads
[1°F increments]
- Set relative humidity touch pads
[1% increment.] | |
STANDARD PRODUCT WARRANTY
One year, parts & labor
